Time to read: 2 minutes
How to replace a Phonak receiver. This information is for Audeo S, Q, V & B version hearing aids.
You can also watch a video here on changing a Phonak Marvel receiver.
- Ensure that you have correct device/s and tools before you start. This includes: your Phonak hearing aids, new receiver/s, pin removal tool.
- The receiver is securely fastened at the top end of the hearing aid by a locking pin. This pin can be accessed on either side of the hearing aid, just below where the receiver is attached.
- Using the pin removal tool, push the pointed side of the tool on either side of the locking pin until the locking pin protrudes on the other side by about 1mm.
- At this point the receiver, is now unfastened and can be removed easily by pulling it away from the hearing aid.
- The new receiver can now be put in place by aligning the 2 pins to the opening at the top of the hearing aid and gently pushing it down into place.
- Once the receiver is securely in place, push the locking pin back (you can use the other end of the pin removal tool to assist) and the new receiver is now securely fastened to the hearing aid.
Did you know that we have a great range of how-to videos on YouTube? You might find these quick and easy to follow tutorials just the thing to assist you in keeping your hearing aids in great working order. Be sure to subscribe to our channel so you don't miss out on a new video.
Can we help? We're delighted to answer questions you have about hearing, hearing loss and hearing aids. We encourage you to use the search feature on our web site. If you cannot find the answer here, then let us know, we'd only be too delighted to write an article or create video.